FREE SHIPPING on all orders over $99 
We’re always working to improve the firmware on Wiral LITE. To help you install the latest firmware on your device, we have created the Wiral Updater app, which you may download on the App Store or Google Play. Follow the steps below to update.
Note: Wiral LITE Firmware v1.3
Please unpair the Wiral LITE unit and the remote before updating firmware, and remember that you will have to update both the Wiral LITE Main Unit and the remote to Firmware v1.3 in order to use Ping Pong Motion.
UNPAIR UNITS
If the main unit and the remote control were paired together before the update, the pairing will be broken after the updating procedure. This means the units need to be unpaired before they can work together again. Follow these simple steps to unpair the units:
To unpair the remote control:
- Hold down both end stop buttons and the play/pause button at the same time, while turning on the remote control.
To unpair the main unit:
- Turn on the unit. Then press and hold the power button for 5 seconds, until button light is
continuously yellow (keep holding the button even if it appears to shut down) - Remove battery to confirm unpairing.
DOWNLOAD WIRAL UPDATER APP
You’ll need to download the Wiral Updater app to your smart phone in order to update firmware.
Next, check out the video below or follow the steps in this article.
UPGRADE FIRMWARE
Install and open the Wiral Updater app, and follow the steps below. (These steps are also described in the app)
01 SELECT DEVICE
The Remote and the Main Unit are both updated through the Wiral Updater app – but it has to be done separately. Choose which one to start with at the top of the screen. Both units should be upgraded to the same firmware version for the firmware to work perfectly.
02 ACCESS FIRMWARE UPDATE MODE
To connect to your device, put it into Firmware Update Mode.
MAIN UNIT:
Turn on your Wiral LITE Main Unit. When the unit is on, press and hold the On/Off button for about 5 seconds until it turns orange (keep holding the button even if the unit appears to shut down).
The Main Unit will now boot in Firmware Update Mode.
REMOTE:
Turn on your Wiral LITE Remote while pressing the right (yellow) end stop button.
The remote will now boot in Firmware Update Mode.
03 SELECT FIRMWARE VERSION
When loading the app, a default firmware will already be selected. If you want to install a different firmware, press the Change Firmware Version button. You are now able to select different versions from the list.
04 INSTALL
When the unit is connected and firmware version selected, click the Upload Firmware button to install the new firmware. That’s it, you’re done – now go have fun with Wiral LITE!
